Skip Navigation
 

Antelope Drive | Glen Eagle Golf Course to 4500 W. | Paving

Antelope Drive | Glen Eagle Golf Course to 4500 W. | Paving

The goal of this project was to extend the life of the roadway by an additional 7–10 years. The top two inches of existing asphalt were removed and replaced with new asphalt.

Overview

Construction Complete

This project was completed on September 19, 2026.

Questions?

UDOT Region 1 office 801-620-1600
Mon - Fri, 8:00 a.m. - 5:00 p.m.

 

Project Overview

UDOT has completed a road repaving project on SR-127 (Antelope Drive) between 3000 West and 4500 West. Construction began on Monday, August 3, 2026, and was completed by September 18, 2026.

The goal of this project was to extend the roadway's life by an additional 7–10 years. Crews removed the top two inches of existing asphalt and replaced it with new asphalt. This process is commonly referred to as a mill-and-fill. Motorists were advised to expect lane shifts throughout the project.

Construction crews worked Monday through Friday from 7:00 a.m. to 8:00 p.m. 

Project Map

Map of construction area on Antelope Drive between Glen Eagle Golf Course to 4500 West.

Project Timeline

Project timeline for the SR 127 Mill and Fill.

Picture of finished repavement on Antelope Drive.

Picture of finished repavement on Antelope Drive.

Picture of finished repavement on Antelope Drive.

Picture of finished repavement on Antelope Drive.

Schedule

Work Hours: 7 a.m. - 8 p.m.

Workdays: Monday - Saturday

*Schedules are subject to change due to weather conditions and material availability.